Wednesday, 9 March 2011

John Stezaker the Whitechapel Gallery ...

I've been meaning to go to the John Stezaker show at the Whitechapel Gallery since it opened, and I finally got round to going to see it. The show was so good I've been a fan of his collages for quite a while and they seem to have been influencing my work quite a lot lately.

What I found really interesting and important was his use of isolating small sections of images and bringing them to our attention , in this way you see things in a way that you wouldn't have been before. This really struck a chord with me and I've been isolating parts of my own images to bring to attention textures. I'm going to work with this idea of taking something out of it's surroundings using cushions as my medium I will draw attention to the places we normally use cushions by letting them take on the background, the creases of sofas and the hard lines of wooden chairs.I also really liked some of his portraits using a combination of postcards and film stills such as Mask IV. You can see some of his collages from the Whitechapel website.

Using some of his principals I applied similar techniques to my own work to draw attention to the texture of fabrics and fibres and creases you wouldn't usually see when looking at an entire image...




















Sunday, 6 March 2011

Stitching metal onto fabric...

Once I'd started stitching fabric into 3D things I thought about reversing this and stitching what is traditionally thought of as a 3D material such as metal or wood onto fabric. In doing this I was aiming to restrict the drape of the fabric and change the way it will naturally fall. I did some initial trials with some thin metal which I drilled and sewed on at each corner.



From doing this I found that triangles on the thinner fabric were a lot more successful because there was more drape the felt had little to know drape so you couldn't really see what effect the metal was having on the movement of the fabric. Also the closer together triangles were a lot better than the ones that were far apart. because it meant the fabric could only bend down one thin line, whereas when they were far apart there was a whole section of fabric that could bend. 

This idea has been working quite well so I think I will try and develop it a little bit more.The shapes reminded me of the fractal work that I had done in a previous project and so I did a bit of research into this area because it would maybe link in well and give me an idea for my final piece.



I thought using the different tones of blue to make the rug look 3D in the last picture was a nice idea. I really liked the idea of optical illusion, maybe of making something 3D look like textiles and vice versa. I think this is a strong concept to base my project on so I think I will probably carry on this idea through the project as it will give me a nice focus.

Friday, 4 March 2011

Stitch experimentation ...

The next avenue for me to discover is stitch. I've decided to look into stitching into 3D object and physically combining them instead of just applying techniques to them. I've looked into the work of Hella Jongerius and decided to try out my own version of stitching into metal objects and wood.





I really enjoyed using stitch and 3D objects. I think aesthetically it is very appealing and is a nice combination of textures. I also really like the Kit element of le pot aux roses by Industreal. I would like to carry this element of customisation/ personalisation with my because I think the interactive element is interesting. However I'm not sure there is that much more that I can explore with stitch and 3D things and I'm not really certain of how i could develop this.

More experimenting with textiles...

After I had tried out folding some fabrics I decided to focus more on the construction of the textiles. I started off by looking at knitting because it's quite an interesting how one continuous line when knotted or interlinked they can build up a 3D shape.


After doing a bit of research into artists and designers who use knitting to create 3D shapes and structures I came across people like Freddie Robbins and Annette Bugansky. Taking inspiration from Annette's work I tried printing into clay with knitting and other fabric samples.





Using a rolling pin worked well to press them into the clay and even amount and give a good imprint, it worked a lot better than I thought it would, and a lot of detail could be seen , lace patterns also worked well.

Folded Fabrics...

My Final Project for my foundation diploma is about how textiles and 3D objects interact and influence each other. My initial idea was to observe how fabrics naturally make 3D shapes through draping and folding. I did a few initial sketches looking at folded and draped fabrics.



From these initial thoughts I decided it would be interesting to look at fabrics that are purposely folded to create 3D shapes. Taking inspiration from using sheet materials and folding into origami I decided to try this out with my fabric, using traditional origami shapes and instructions to apply to my fabric.





Using origami wasn't all that successful, folding the fabric worked much in the same way as folding the paper, I purposely chose a relatively stiff fabric which was starched shirt material. However to keep the folds in you had to iron the fabric. Each time I wanted to make a new fold I accidentally ironed the other folds out. Not too bad for initial research but I don't think I will be carrying this idea forward.

Saturday, 19 February 2011

My little cushions are for sale...

I finally have my etsy shop up and running and you can purchase them from my etsy shop which is http://www.etsy.com/people/BeciMay?ref=ls_profile

so far I only have the bears up but I will also have sausage dogs and armadillos up if they do well!



Thursday, 17 February 2011

Final Project...

This week was the first week of my final major project. We were able to choose our own brief for this project and guide our studies for a show at the end of the year. I chose to investigate the interaction between 3D objects and textiles inspired by artists such as Hella Jongerius. Initially I started looking at the folds of textiles and how they naturally fall. I then developed this by purposefully creating folds in the fabric to make origami like structures.




I then looked at using knitting and ready made woven fabrics to create patterns into clay like the artist Alyssa Ettinger.









Finished cushions...

So I've finished cutting out all the bears and all the sausage dogs and made some bear cushions ready to sell at craft fairs and on an etsy shop.

So here are the finished cushions, some of them at least and I'll be making more over the weekend.



Wednesday, 16 February 2011

Making little cushions...

I spent about 4 hours yesterday printing fabric for a new range of cushions, so far I have cut out the bears but I still have armadillos and sausage dogs to go. But here's a little preview of the bears all cut out and ready to be sewn.

Friday, 11 February 2011

Collecting...

So I've finally finished my portfolio and have been working on a collections project which focusses on my teacup collection. Because I only have the teacups and not the saucers my project really came from the idea of completing my project by making saucer or saucer type objects to make the set.

I experimented with trying to cast new saucers with different materials using fabric casting techniques and a 2 part mould to do flash moulding and a rotational mould. Unfortunately my casting wasn't that successful, but I came up with the idea of making coasters with the same pattern. I'm not completely happy with this project but I will develop it more over the weekend if i get enough time.



These are my unsuccessful latex saucers but now I have the mould I will try making some more that are a bit better but for a first try they were okay.